HCR Suspension Polaris RZR XP1000/Turbo Dual Sport LT Suspension Kit
HCR’s proprietary billet, slot and tab design and honeycomb boxed arms are built to withstand the beatings of rigorous off-road riding which achieving the optimal combination of strength and appeal. Designed to improve the vehicle’s handling, stability, and overall performance, both on and off the road. The A-arms are also designed to increase the vehicle’s ground clearance, allowing you to take on more challenging terrain.
Kit Features:
- HCR alloy used to build every kit is 30% stronger than 4130 Chromoly
- Every external weld is an internal plate structured into the design
- HCR kits run a 4130-heat treated billet end allowing all internal and external plating to be attached to this billet eliminating a potential weak point
- Billets are available in both ball joint and spherical applications
- HCR Shock tower to reduce compound leverage and achieve a better motion ratio
- Addition wheelbase of +3 inches
- Additional width of +4 inches per side
- Ground Clearance increased by 1.25 inches in the arm design
- RCV 4340 Chromoly extended axle bars
- King 2.5 Series HCR Spec. shocks with a 2.5 piggyback up front and the 2.5 IBP in the back
IBP Front Upgrade:
- Intended for the Dune enthusiast, Racers, and those who like to push it that much harder.
- This upgrade extends the same internal bypass technology included in the rear shocks to all 4 corners.
- This patented needle-valve design allows for less bottoming and shock fatigue on square edges, G outs, long distance racing, jumping, etc.
- Where the front end needs a little more.
High Clearance Radius Rods:
- The high links are recommended for the recreational trail rider or Rock crawler.
- These all new HCR Aluminum High Links are a great way to get clearance under the rear and avoid rocks while out on the trails.
- Additional cost to upgrade.
Straight Radius Rods:
- These heavy-duty HCR Race links follow the same design as the standard radius rod with material increased to .120 wall tubing.
- The 5/8-18 heims are available in Right hand threads only.
- Additional cost to upgrade.
Kit Contains:
- 4 Front A-arms
- 2 Rear Trailing arms
- Tie-rod Extensions
- Shock Tower
- 4 RCV Axle bars
- 4 King 2.5 HCR Spec. Shocks
- 4 Radius Rods
- Heavy-Duty Backplate
- Hardware Pack
- Install guide
Must use 4+3 offset wheel with this Kit.
